Marmorino Plaster
Natural Calk Marmorino is a plaster finishing layer (skim coat), suitable for use on interior and exterior surfaces. Produced with wood-fired magnesian lime putty, in compliance with UNI EN 459-1 standard, it is naturally aged in tanks and blended with limestone, marble granules, carbonates, coloured earths, and inorganic pigments. This product is highly durable: it does not shrink, is resistant to alkaline attack and saline air, and is dust-free.
Natural Calk Marmorino is ready to use and available in white or custom colours upon request. Since it is already pigmented, no additional paint layers are needed, though it can be customized with Natural Calk Lime Milk Paint.
Available in two grain sizes, C100 and C200, the product can be applied in two or more coats, depending on the desired finish. It is suitable for a variety of techniques: trowel and sponge, laminated, or smoothed finishes. Thanks to its natural and eco-friendly composition, free from chemical additives, it is particularly recommended for bioarchitecture projects and the restoration of artistic and historical buildings.
Scope and Product Application
Natural Calk Marmorino can also be used as a finishing layer within the Tillica Pasta Natural Calk system. It is applied in two coats, after the application of Natural Calk Antibacterial Primer, if required.
Application methods and drying times between coats may vary depending on the type of finish and weather conditions.
Features and Benefits
- Ready to use: no complex preparation required.
- Excellent breathability (μ 4.5): ideal for maintaining a healthy indoor climate.
- Resistant to saline air: perfect for coastal areas.
- Fire-resistant: does not burn or release toxic substances.
- Resistant to alkaline attack: ensures long-term durability.
- Dust-free: keeps the surface clean and compact.
- Recyclable material: low environmental impact.
- Long-lasting: does not shrink or deteriorate.
Average yield
- Grain size C200: 3–4 kg/m² per coat.
- Grain size C100: 2–2.5 kg/m² per coat.
Warnings
Natural Calk Marmorino must not be applied at temperatures below 7°C or above 30°C. Care must be taken when applying the product in well-ventilated environments or those at risk of rapid drying, and the treated surface should be protected from temperature fluctuations, frost, and rain during the drying phase.
It is essential to exclusively use Natural Calk products at every stage of the Tillica Pasta System to preserve the system’s properties and ensure its full effectiveness.
The company is responsible for the product up to the point of shipment from the Arte e Mestieri Srl warehouse/supplier premises. The application and use of the product are the responsibility of the customer or the applicator. The company reserves the right to modify the composition while maintaining the product’s fundamental properties.
Certifications & Safety
Tillica is rigorously tested and certified by leading Italian institutions. It complies with EU directives and CEE building product standards.