TILLICA PASTA
- Product description
Naturalcalk Tillica Pasta Pasta is a heat-insulating and heat-reflecting product, a combination of raw materials that manage to insulate and enhance the best thermal value of the building inside and to cancel the thermal load outside. It is made up of lime putty seasoned according to UNI EN459-1 standards and amorphous silicon, it enters the parameters of the EEC directive on construction products (CPD) 89/106/EEC.
- FIELDS OF USE AND PRODUCT APPLICATION
Naturalcalk Tillica Pasta applied with a trowel or with an air gun does not change the granulometry of the mix, while applied with a pump, the granulometry crushed by the pumping system decreases the thickness, which can decrease due to evaporation of the water from the lime putty, but the value does not change insulating. It is important to evaluate the kg that are applied on 1m2 of damp Tillica.
The use of products from the Natural Calk line is absolutely rigorous, to maintain the characteristics of the material and guarantee the result.
Application on new walls: on plaster with a regular and straight application.
On old walls, remove the old paint, possibly reaching the thick plaster, apply a coat of Naturalcalk Antibatterico, do not wait more than 8 hours for the application of wet Tillica Pasta, let it dry and apply the finishes, skim coats, plasters and subsequent processing.
Wet the surface before applying Tillica Pasta in high temperatures or windy days, in cold weather do not work at temperatures below 4°C.
Application on pre-finished slabs (plasterboard) apply a coat of acrylic insulation, then apply a rough Natural Calk Biorasante on a dry surface wet Tillica Pasta. umid The same precautions described for the other two applications described above apply. Proseguire con le successive finiture, rasanti intonachini e successive lavorazioni.Continue with the subsequent finishes, smoothing plasters and subsequent processing.
- PRODUCT FEATURES AND BENEFITS
The use of products from the Naturalcalk line is absolutely rigorous, to maintain the characteristics of the material and guarantee the result.
Why should you choose Naturalcalk Tillica Pasta?
- It’s easy to apply
- Practical, it is a ready-to-use paste product, convenient for transport and storage
- Safe, applied to the wall, it creates a single body with the existing plaster
- Shock resistant
- Breathable, it keeps the building in thermal and water balance
- Insulating, it is not putrescible, it maintains and improves its insulating characteristics over time
- Natural, produced with selected natural raw materials
- Fireproof, it does not burn and does not give off toxic fumes in contact with the flame
- Recyclable, it does not create waste, it is totally used
- V.O.C. gas free
- Superior thermal performance.
- Average consumption, 0.60-070 l/mm/m² With 15 l the average yield is equal to: 1.8m² 4-5m² 7-8m² with 8.3 l/m² equal to 20 cm of eps with 3.3 l/m² equal to 10 cm of eps with 2.0 l/m² equal to 6 cm of eps.
- WARNINGS
Naturalcalk Tillica Naturalcalk Tillica should not be applied with temperatures of the atmosphere or of the support below 5°C or above +30°C, paying attention to use in excessively ventilated environments or at risk of rapid drying, protecting the treated surface from sudden changes in temperature. During drying, protect from frost and rain
The EXCLUSIVE use products Naturalcalk line in each layer of the TILLICA PASTA SYSTEM is absolutely rigorous to maintain the characteristics of the system itself and guarantee the result.
THE EXCLUSIVE USE OF THE PRODUCTS OF THE NATURAL CALK LINE IS ABSOLUTELY STRICT IN EVERY PROCESSING PHASE OF THE TILLICA PASTA SYSTEM IN ORDER TO MAINTAIN THE CHARACTERISTICS OF THE SYSTEM AND TO GUARANTEE THE RESULT.
THE COMPANY TAKES ON SOLELY RESPONSIBILITY FOR THE PRODUCT UP TO THE DEPARTURE OF THE MATERIAL FROM THE DEPOSIT/SUPPLIER ARTE E MESTIERI SRL WHILE THE APPLICATION, USE AND PROCESSING ARE THE EXCLUSIVE RESPONSIBILITY OF THE CUSTOMER OR THE APPLICATOR.
THE COMPANY RESERVES TO MODIFY THE COMPOSITION KEEPING THE CHARACTERISTICS NATURALLY UNCHANGED.
Energy efficiency in edilizia 2012
Arte e Mestieri snc 1° classified for section A “Eco-sustainable materials”.
Tillica, the new generation low thickness coat
A completely natural 5mm thick thermal insulating skim coat, with higher energy performance than the traditional one
Green light to the paint that heats up
The province will experiment with it to save on bills for schools
contacts
Arte e Mestieri SRL
di Ermacora Albiz e Fabio
Albiz. 347.7137815
Fabio. 340.5546977
Mail:
Missionari Casarsesi Street, 15
33072 Casarsa della Delizia (PN)
p.iva 01632710933
n.REA PN-92140
Cap. Sociale € 3.000,00
PEC: artemestieri@pec.cgn.it
